Akses point type ini memiliki output Rf hingga 26 db atau setara dengan 400 mW. Sehingga bila digunakan jangkauannya bisa lebih jauh dibandingkan dengan aksespoint biasa. Akses point ini didesain untuk indoor ( Dalam gedung atau ruangan ), sehingga bila ingin menggunakannya untuk Out Door harus dimasukkan didalam Box sehingga lebih aman baik dari hujan maupun dari kepanasan sinar matahari. 26dbm (400mw) Wireless Indoor Multi-Client Bridge/AP/ WDS-NCB-3220 Product Description The Wireless Multi-Client Bridge/Access Point/ WDS (wireless distribution system) operates seamlessly in the 2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz, 11Mbps) and the newer, faster 802.11g (2.4GHz, 54Mbps) wireless standards. It's the best way to add wireless capability to your existing wired network, or to add bandwidth to your wireless installation. To protect your wireless connectivity, it can encrypt all wireless transmissions through 64/128-bit WEP data encryption and also supports WPA. The MAC address filter lets you select exactly which stations should have access to your network. With the Wireless Multi-Client Bridge/Access Point/WDS, you'll experience the best wireless connectivity available today. Product Features | | Features | Benefits | | High Speed Data Rate Up to 54Mbps | Capable of handling heavy data payloads such as MPEG video streaming | | IEEE 802.11/b/g Compliant | Fully Interoperable with IEEE 802.11b/IEEE802.11g compliant devices | | Point-to-point, Point-to-multipoint Wireless Connectivity | Let users transfer data between two buildings or multiple buildings | | Plug and Play | No driver needed, easy and quick to connect your Ethernet device to Wireless | | WPA (Wi-Fi Protected Access) | Powerful data security | | Hide SSID (AP Mode) | Avoids unallowable users sharing bandwidth, increases efficiency of the network | | DHCP Client/ Server | Simplifies network administration | | WDS (Wireless Distributed System) | Make wireless AP and Bridge mode simultaneously as a wireless repeater | | MAC address filtering (AP Mode) | Ensures secure network connection | | Power-over-Ethernet (IEEE802.3af) | Flexible Access Point locations and cost savings | | Output Power Controllable | Adapts for external antennas to be any certification | | | Product Features | | General | | | Data Rates | 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps | | Standards | IEEE802.11b/g, IEEE802.1x, IEEE802.3, IEEE802.3u | | Compatibility | IEEE 802.11g/ IEEE 802.11b | | Power Requirements | Power Supply: 90 to 240 VDC +/- 10% (depends on different countries) Device: 12 V/ 1A | | Status LEDs | LAN: Link, WLAN: Link, Power: on/off | | Regulation Certifications | FCC Part 15/UL, ETSI 300/328/CE | | RF Information | | | Frequency Band | 2.400~2.484 GHz | | Media Access Protocol | Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) | | Modulation Technology | Orthogonal Frequency Division Multiplexing (OFDM) DBPSK @ 1Mbps DQPSK @2Mbps CCK @ 5.5 & 11Mbps BPSK @ 6 and 9 Mbps QPSK @ 12 and 18 Mbps 16-QAM @ 24 and 36 Mbps 64-QAM @ 48 and 54 Mbps | | Operating Channels | 11 for North America, 14 for Japan, 13 for Europe, | | Receive Sensitivity (Typical) | -94dBm @ 1Mbps, -92dBm @ 2Mbps, -89dBm @ 5.5Mbps, -86dBm @ 11Mbps, -92dBm @ 6Mbps, -90dBm @ 9Mbps -88dBm @ 12Mbps, -86dBm @ 18Mbps, -83dBm @ 24Mbps, -79dBm @ 36Mbps, -74dBm @ 48Mbps, -72dBm @ 54Mbps | Available transmit power (Typical) | 25 min dBm @1 ~ 24 Mbps 23 +/- 2dBm @36Mbps 21 +/- 2dBm @48Mbps 20 +/- 2dBm @54Mbps | | RF Connector | TNC Type (Female Reverse) | | Networking | | | Topology | Ad-Hoc, Infrastructure | | Operation Mode | Point-to-Point/ Point-to-Multipoint Bridge/ AP/ Client Bridge/ WDS | | Interface | One 10/100Mbps RJ-45 LAN Port | | Security | IEEE802.1x Authenticator / RADIUS Client (EAP-MD5/TLS/TTLS) Support in AP Mode WPA2/ WPA/ Pre-share Key (PSK)/ AES/ TKIP MAC address filtering Hide SSID in beacons | | IP Auto-configuration | DHCP client/server | | Management | | | Configuration | Web-based configuration (HTTP) Telnet configuration SNMP V1(MIBI, MIBII) | | Firmware Upgrade | Upgrade firmware via web-browser | | Environmental | | | Temperature Range | Operating: -10C to 50C (14F to 132F Storage: -40Cto 70C (-40F to 158F) | | Humidity (non-condensing) | 5%~95% Typical | | | Support Resources  
|